Instructor:
Caleb Kemere
Office: BRC 727
Office Hours: (please verify via email) Monday, Wednesday 9:00-10:00am (RMC Coffee House)
caleb.kemere@rice.edu
Grader/TA:
Lab Assistants:
Lab Office Hours:
Additional Lab office hours may be requested on Piazza or by email
Text Book: There is no text book, but you will need to purchase a solderless breadboard for prototyping. A smaller one is fine, but a larger one (such as this one) may be easier to use. Furthermore, you should take care of the MSP430 Launchpad you will be given.
Class Hours: Wednesday 3:30 – 6 PM DH1046/AL124/DH1020 Our plan for this semester will be to start with a brief lecture and then work on labs each week during official class hours. Students are expected to spend significant out-of-class time (~10 hours per week) working on lab assignments.
Lab Help Sessions: See Lab Assistant hours or by request on Piazza or through email
Help sessions held in lab room A124
Lab Access Keypad Code: …– -…. —-. —-. #
Course website:
We use 2 different digital resources:
Course Description: One of the most critical aspects of modern computer systems involves interfacing with the world. This course will focus on how power-efficient user-facing systems are built.
Objective: Students should learn the fundamentals of embedded system programming and feel competent to design, build, and manufacture their own embedded devices. Furthermore, students should understand how embedded systems interface with external peripheral devices. Students should understand how application-specific blocks enable modern commercial devices. Finally, students should understand how to design and build their own embedded systems including printed-circuit board design and assembly.
Outcome: Students completing the course should be able to:
Prerequisites: ELEC 220. Also useful are 240 and 241.
Grading: Grades will be based on: approximately eight lab modules (60%), a midterm project (15% each), and a final project (25%). Late assignments may be accepted (with penalty), except for printed circuit board orders , where late submissions may not be accepted. Students wishing to submit late assignments should contact the instructor prior to the due date.
Honor code: You are encouraged to work with other students in ELEC327 on the labs. Each student should turn in their own lab writeup (except for midterm and final project, which should be done in pairs). I would like you to write your own code and (especially) comments for the labs.
Required Textbooks and Supplies:
No textbook is required. Students will be provided with one MSP430-G2553 Launchpad and an associated “Sidekick” kit which contains a solderless breadboard and jumper wires. More jumpers will be available in lab. It is recommended that students procure a larger solderless breadboard - they can be purchased, for example, on Amazon for $30-40.
Lab Cleanliness:
Historically, the lab space has not been maintained in a neat and orderly manner. Starting in 2017, we will implement spot inspections and class-wide grade deductions to try to ensure that a high quality working and learning environment is maintained.
Waste: In the process of learning how to assemble (i.e., solder) surface mount devices, there has been not-insignificant waste, where things end up on the floor. While we would prefer to avoid artificially limiting students supplies, we will do so if waste is not contained.